0.1mm-25mm Jinhaocheng Plain Thermal Bonded Silk Wool Polyester Cotton Non Woven Wadding Batting Padding

technological process
Cotton feeding: manually place the raw staple fiber on the long curtain in proportion, and the long curtain will transport it to the inlet of the cotton mixer.
Cotton mixing: 1. Photoelectric control is used to control the cotton feeding amount fed by the cotton feeder, and the cotton storage in the cotton mixer is sent to the opening machine inlet with quantitative thickness or weight.
Loosening: the feeding amount is controlled by the photoelectric control of the cotton feeder, and the loosened raw staple fiber is sent to the cotton feeder through the material pipe by the fan.
Cotton feeding: photoelectric switch is used to control the raw staple fiber fed from the opener, and the feeding amount of raw staple fiber sent to the carding machine inlet is controlled through the photoelectric instrument on the inclined nail curtain.
Pre carding: manually fine tune the speed of the frequency converter by controlling the incoming volume, thickness or weight with frequency conversion and send it to the mesh paver.
Mesh laying: the raw materials entering the mesh laying machine are sent to the main carding machine through the laid sheet-shaped short fibers folded horizontally and longitudinally for more than 5 layers.
Main carding: the sheet short fiber sent by the screen laying machine is controlled by frequency conversion. The raw short fiber is combed through the cylinder, work roll and stripping roll, and the raw short fiber is transferred to the disordered roll by the doffer. The disordered roll disrupts the fiber to increase the transverse strength, and the stripping roll peels the forming mesh from the disordered roll and sends it to the fiber mesh transfer curtain for three layers of composite, The edge cut by the edge cutter enters the hot rolling, and the cut edge is sent to the cotton feeder through the air duct.
Hot rolling will hot press the flake raw material staple fiber entering the upper and lower hot rolls of the hot rolling mill from the main carding machine to form the temperature and pressure required by the process through the control and adjustment of the temperature and pressure of the hot roll* The temperature of the hot roller is 235 to 240 ℃ hot oil sent to the upper and lower hot rollers through the hot oil pump by the heating oil furnace* The hot roll pressure is compressed air provided by the air compressor, which enters the pressure regulating cylinder through the pressure regulating device with an upper pressure of 1.2MPa and a lower pressure of 0.8 to 0.9mpa.
Winding the products from the hot rolling mill are wound into coils by trimming and length counting, and the maximum diameter is 800mm.
The finished products shall be inspected and weighed, and the physical indexes shall be tested according to the product quality standards, and each roll of products shall be weighed.

   Founded in the year of 2014, Shanghai Uneed Textile Co.,Ltd (UNT) is one of the professional supplier of garment accessory and non woven fabric products in China.

   Our headquater and marketing center located in Shanghai, and we had set up eight production bases in Shanghai, Jiangsu and Zhejiang Province. We are special producing and selling various of Middle and high quality of fusible woven and non woven interlining, Shirt interlining, Hair interlining, Shoulder pads, Hotmelt adhensive web and film, Spunbond and Spunlace non woven fabric,etc. By virtue of the comprehensive advantage of interlining, non woven fabric, shoulder pads and hotmelt adhensive web , we are also committed to providing “One-Stop” garment accessory package service (like Chest cotton, Breast canvas,Sleeve head,Tape,Under collar felt,Waistband and Pocketing etc.) . Our company’s brand “UNT” had been well-known by many domestic and world famous clothing brand and traders, and gained good reputation in the world.

   All of our products have got OEKO-TEX STANDARD 100 certificate, Most of our products are exported to more than 30 countries and regions of Europe, America, Korea , Middle east and Southeast asia etc.

   As a quality supplier of garment accessories and nonwovens, We are basing in Shanghai,Facing the Nationwide, and taking the whole world in view. We pursue “ Quality and Service, Our Life and Future” as our business philosophy. We provide the best and shortcut “One-Stop” garment accessory package service for World famous clothing brand, We take "Gratitude, Respect, Integrity, Win-Win" as the value and “ Act perfect for 100-year-Enterprise, Creat the World’s famous brand” as Enterprise Vision. We always keep continuos innovation and pace with times to work together with our customers for a better future.